wireless printer not seen by computer

[rrwwff]

New Xerox B235 printer connects to Liahona network, but when I try to add printer MACaddress to Group Policy, computer doesnt find printer. Can add MACaddress manually but still no connection between computer and printer.
Any help appreciated.

[russellhltn]

I'd assign the printer a fixed IP address. Use the "add a printer" function, "The printer I want isn't listed", "Add a printer using an IP address or hostname".

[rrwwff]

the printer is not found withits IP address; i.e., I ping the IP address with no response

[russellhltn]

the printer is not found withits IP address; i.e., I ping the IP address with no response

Not all devices respond to a ping. Try accessing it from a web browser using it's IP as many printers do run a web service.

[Mikerowaved]

New Xerox B235 printer connects to Liahona network, but when I try to add printer MACaddress to Group Policy, computer doesnt find printer. Can add MACaddress manually but still no connection between computer and printer.
Any help appreciated.

Under Select Group Policy:, be sure "Iot" is NOT selected. To see devices on the public network it should be set to "NoSplash".

[rrwwff]

Group policy was set to no splash and used browser to search for IP address but to no avail. I took printer home and connected it to my home wireless w/o problem so issue is with wireless network at church....

[Mikerowaved]

After the printer's connected to Liahona, please print the Network Setup Page.

From the control panel, navigate to: Settings --> Reports --> Network --> Network Setup Page

I'm curious what it shows for the following in the Wireless Section of the report:
IP (IPv4) Address
Net Mask
Gateway
DNS Server

[rrwwff]

attached wireless report

[russellhltn]

I'd check on a connected computer to see what the DNS is set to. If the printer is not getting the DNS from the network, that would explain why it's not connecting.

[russellhltn]

I checked the DNS. That's correct for a meetinghouse, so that's not the issue.