help! meetinghouse communicator software

aclawson · Post by **aclawson** » Sat Nov 13, 2010 9:21 pm

aczlan wrote:As I understand it, the expressions program limits you to 10 minutes, but the Meetinghouse Communicator just uses the codecs (the software that instructs the computer how to digitize the video) from it, so you are not limited to 10 minutes.
I could be wrong (I have been in the past), but that is how it appears to me.

Aaron Z

One way to find out....

aclawson · Post by **aclawson** » Sat Nov 13, 2010 9:43 pm

Stream has been running for 19:30 and still going.... can anybody else verify so we can rule out something else that might have been loaded on my machine?

stephen500 · Post by **stephen500** » Sun Nov 14, 2010 2:16 pm

aczlan wrote:So, new installs of WME9 x64 are not working, where old ones are? Sounds odd. I emailed the WME9 x64 installer to stephen500, lets see if it gets there and how it goes for him.

stephen500, if you don't get an email from me with the program attached, let me know and I will put the file up on an FTP site where you can download it.

Thanks

Aaron Z

Aaron Z, As i said in my e mail many thanks for mne 9 (64 bit) edition.
it worked a treat.
It stopped working once and all I had to do was reinstall meetinghouse communicator 2.0 again. Which if I even had to do for every broadcast would be easy!
I tried to attach it here, but it won't let me.
So if any one needs it contact me, Aaron z, or Jacob Stark.
I have sent it to jacob stark, who works for the church and helped me with this problem.
Once again many thanks to all and Aaron Z for the attachment.

stephen500 · Post by **stephen500** » Wed Nov 17, 2010 9:23 am

Thanks for everybodys help. The broadcast went well, we had one outage.
Funny how we had no outage for two hours before the event.
I booted it up two hours before and was afraid to turn it off it case it stopped, which it did for a few moments during the broadcast!

starkjs · Post by **starkjs** » Wed Nov 17, 2010 2:57 pm

I see a few comments about the stream only lasting for 10 minutes with expression. Can anyone else verify this? The free version works without any time constraint so I am not certain why users are experiencing this behavior. @Stephen, I'm extraordinarly happy to hear that you were able to get this solution working in time. What was the nature of the outtage that you experienced?

stephen500 · Post by **stephen500** » Fri Nov 19, 2010 3:25 pm

aczlan wrote:It sounds like either the 3.0 was not letting you switch where it looks for sound, or you somehow missed that setting.

Aaron Z

Both Jacob Stark and myself checked it and found that it just did not work.
On the encoder it worked fine and expressions and version 2.0 when I managed to install wme 9, 64 bit.