We have a Stake Conference coming up and I am in need of more than one hard-wired Ethernet port at the podium. Am I allowed to install a small/cheap switch to expand the single Ethernet drop to four ports at the podium? If so, what type of switch will work? I have many cheap “home grade” 1G switches that could be used, but using one to test this out was a bit flakey - won’t hold a connection on any port for more than a minute or so before renegotiating. Do I have to configure that connection in the managed switch differently? Thanks.
Kelly Stevens STS Draper Corner Canyon Stake
Using a small switch to expand Ethernet port
-
kgstevens
- New Member
- Posts: 5
- Joined: Thu Oct 07, 2021 6:59 am
-
lajackson
- Community Moderators
- Posts: 11653
- Joined: Mon Mar 17, 2008 10:27 pm
- Location: US
Re: Using a small switch to expand Ethernet port
I do it all the time but at the AV rack, not the pulpit. Still, it should also work there. Just make sure it is an unmanaged switch that is not trying to do anything special other than to split the line. And you should not have to make any change to your managed switch back at the firewall/router.
-
russellhltn
- Community Administrator
- Posts: 35301
- Joined: Sat Jan 20, 2007 2:53 pm
- Location: U.S.
Re: Using a small switch to expand Ethernet port
Make sure it's an actual switch and not a home router that will try to add services that will mess everything up.
It's quite possible the cable wasn't run correctly and can't support 1G. See if you can set the switch connection for 100M.
It's quite possible the cable wasn't run correctly and can't support 1G. See if you can set the switch connection for 100M.
Have you searched the Help Center? Try doing a Google search and adding "site:churchofjesuschrist.org/help" to the search criteria.
So we can better help you, please edit your Profile to include your general location.
So we can better help you, please edit your Profile to include your general location.
-
kgstevens
- New Member
- Posts: 5
- Joined: Thu Oct 07, 2021 6:59 am
Re: Using a small switch to expand Ethernet port
thanks for the prompt replies. I will try different switches and try lowering the speed to 100M.
-
kgstevens
- New Member
- Posts: 5
- Joined: Thu Oct 07, 2021 6:59 am
Re: Using a small switch to expand Ethernet port
Our Stake Conference worked out great. Not perfect, but worked. I used an old Ubiquity ToughSwitch (with DHCP off of course) to add the devices needed. They all connected at 1G.
I learned a lot - which is good. My biggest issue is I likely have a rogue switch/router on the network with DHCP turned on - confusing some new device connections by throwing them an invalid IP address. I need to now figure out how to trace this (these) devices down. There are not too many hardwired devices on the network, so will just take time and patience.
I learned a lot - which is good. My biggest issue is I likely have a rogue switch/router on the network with DHCP turned on - confusing some new device connections by throwing them an invalid IP address. I need to now figure out how to trace this (these) devices down. There are not too many hardwired devices on the network, so will just take time and patience.
-
russellhltn
- Community Administrator
- Posts: 35301
- Joined: Sat Jan 20, 2007 2:53 pm
- Location: U.S.
Re: Using a small switch to expand Ethernet port
Most likely it's in a clerk's office, or if you have one, a FamilySearch center.
Have you searched the Help Center? Try doing a Google search and adding "site:churchofjesuschrist.org/help" to the search criteria.
So we can better help you, please edit your Profile to include your general location.
So we can better help you, please edit your Profile to include your general location.
-
lajackson
- Community Moderators
- Posts: 11653
- Joined: Mon Mar 17, 2008 10:27 pm
- Location: US
Re: Using a small switch to expand Ethernet port
And you might check to see if it is emitting a Wi-Fi signal. That would be a quick way to find it.russellhltn wrote: ↑Mon Oct 28, 2024 11:41 am Most likely it's in a clerk's office, or if you have one, a FamilySearch center.