Mevo Start Chapel Placement

Discussions around receiving, originating, and holding Church broadcasts and conferences in meetinghouses including schedules, setup, equipment, and support.
Post Reply
Seyersdahl
New Member
Posts: 3
Joined: Sat Jan 09, 2021 8:40 pm

Mevo Start Chapel Placement

#1

Post by Seyersdahl »

I am hoping this is the right Forum for this. I realize there are other solutions and many of our wards are using some very distracting and complicated solutions. Before seeing the recommendation that Mevo Start was on the list we had already tested and chose this solution as a Stake. I am personally depending on the building either halfway back on the Bishops side (so people can see the Bishop) in the pews or in the same side at the back of the room. Being in a remote location with many units that are small and different sizes brings many challenges. We really like how well this solution has been working for our wards/branches.

My question to those who have these Mevo Starts how are you utilizing the placement in the Chapel to avoid the devices from being a distraction?
hugginsryan
New Member
Posts: 2
Joined: Wed Jul 22, 2009 12:51 pm
Location: USA

Re: Mevo Start Chapel Placement

#2

Post by hugginsryan »

We aren't using a Mevo, but I have an adapter to mount a webcam on a microphone stand. I put it on a table in front of the first pew directly in front of the pulpit.

I think the microphone stand is much less distracting than a tripod.
Attachments
ChapelCameraPlacement.jpg
(830.93 KiB) Not downloaded yet
brenchld
New Member
Posts: 5
Joined: Sat Oct 19, 2013 11:34 am

Re: Mevo Start Chapel Placement

#3

Post by brenchld »

We put our Mevo about 2 rows back from the front on a mic stand. Have it about 5'5" high. This isn't really noticable for most people, except for the first few pews directly behind and people just don't sit there, they move to the side a foot or so if it's in the way.
User avatar
sbradshaw
Community Moderators
Posts: 6428
Joined: Mon Sep 26, 2011 9:42 pm
Location: Utah
Contact:

Re: Mevo Start Chapel Placement

#4

Post by sbradshaw »

You could put a music stand one or two rows from the front in the chapel, tilted so the top is flat, and use it as a table for the camera. This works well in my ward (we don't have a Mevo, we just use a laptop with a built-in webcam facing the podium).
Samuel Bradshaw • If you desire to serve God, you are called to the work.
Wattsuk
Member
Posts: 168
Joined: Sun Apr 04, 2021 3:53 am

Re: Mevo Start Chapel Placement

#5

Post by Wattsuk »

brenchld wrote:We put our Mevo about 2 rows back from the front on a mic stand. Have it about 5'5" high. This isn't really noticable for most people, except for the first few pews directly behind and people just don't sit there, they move to the side a foot or so if it's in the way.
That's interesting that we've found the sweet spot to be about 5'5" high and about the same away from the pulpit.

We've been using the mevo since August last year and our approach has evolved over that time.
We've had it closer, further, lower and higher and the 5 and half foot rule seems to be just the right balance based on feedback from dozens of members with a keen eye and interest in the subject.

What looks fine in person, is very different to what looks normal for a broadcast.
Steep learning curve for us with no professional experience in this field but some youtube instruction and plenty of feedback/dialogue from those at home has helped greatly.

We also find that the lighting can make a dramatic difference. We actually leave some of the lights turned off which gives a better image in terms of colour and brightness. Might be something for you to test in your particular building.
Post Reply

Return to “Broadcasts and Conferences”